HP PAVILLION ZD7000 - Manual (Page 36)

2–12 Maintenance and Service Guide
Troubleshooting
Flowchart 2.2—No Power, Part 1
1. Reseat the power cables in the
expansion base and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Done
Remove from
expansion base
(if applicable).
Power up
on battery
power?
Power up
on AC
power?
Power up in
expansion
base?
Power up
on battery
power?
Power up
in expansion
base?
Done
*Reset
power.
*Reset
power.
Power up
on AC
power?
N
Y
Y
N
N
Y
N
N
Y
Y
Y N
1. On some models, there is a separate
reset button.
2. On some models, the notebook can be
reset using the Standby switch and
either the lid switch or the main power
switch.
*NOTES:
Go to
Flowchart 2.4,
No Power,
Part 3.
Go to
Flowchart 2.3,
No Power,
Part 2.
Go to
Flowchart 2.8,
Nonfunctioning
Expansion Base.
No power
(power LED
is off).
333621-001.book Page 12 Wednesday, September 17, 2003 12:24 PM