beautypg.com

Changing the core tube on the take up reel – HP 3000CP User Manual

Page 88

background image

Working with Media
Changing the Core Tube on the Take Up Reel

3-36

Changing the Core Tube on the Take Up Reel

The Core tube on the Take Up Reel must be the same width as the media you are
using. To change the core perform the following procedure.

1 Slide open the spindle lock on the right hand side of the Take Up Reel.

2 Remove the Take Up Reel spindle from the printer as shown by pulling firmly on

each end of the spindle, A then B.

12'' / 305mm

C472358

A

B

12'' / 305mm

42'' / 1067mm

+

54''/1372mm

=

+

36''/915mm

=

+

50''/1270mm

=

C472349d