beautypg.com

HP 3000CP User Manual

Page 257

background image

Troubleshooting

Solving Ink System Problems

11-33

Out of ink

One or more of the four ink systems are out of ink. If the last print showed image
print quality degradation, replace the ink systems affected.
n See 11-38, Checking Ink Systems.
n Check the ink levels (see 4-9, Monitoring the Ink Level). If there is still a large

amount of ink remaining in the ink cartridges, see the message “Printhead
failure”.

Printhead align-
ment cancelled

This message occurs when the alignment routine is cancelled because of a dirty lens
cover or a problem with the media.
n See 11-35, Printhead Alignment Errors.

Printhead alignment
error

This message occurs when the printhead alignment procedure has failed, or the
printer detects a fault that stops the process from completing. Alignment is the first
procedure that prints with the printheads after installation, so some printing
problems may be reported as a Printhead Alignment Error. Most alignment errors
are due to a fault with the printheads, or problems with the media.
n See 11-35, Printhead Alignment Errors.

Printhead check
cancelled

This message occurs when a printhead check is cancelled because of a dirty lens
cover or a problem with the media.
n See Printhead Checks on page 11-37.

Printhead check
error

This message occurs when the printhead check procedure has failed, or the printer
detects a fault that stops the process from completing. Most printhead check errors
are due to a fault with the printheads, or problems with the media.
n See Printhead Checks on page 11-37.

Printhead contact
error

There is an electrical problem with one or more of the printheads.
n See the message “Printhead contact error”.

Printhead failure

The ink systems have failed and should be replaced.
n See the message “Printhead failure”.

Printhead removed

One or more of the printheads are not detected by the printer. Printing has been
disabled.
n See 11-38, Checking the Printheads.

Verify ink system

At power-on, the printer has detected an error in one or more of the ink systems.
n See 11-38, Checking Ink Systems.