Installing a new roll into the printer – HP 3000CP User Manual

Page 85

Text mode
Original mode

Working with Media

Installing a New Roll into the Printer

3-33

Installing a New Roll into the Printer

1 If an empty spindle is installed in the printer, open the roll cover and remove the

empty spindle by pulling firmly on each end, A and then B as shown below.

2 Remove the new roll from its wrapping.

3 HP Heavyweight Coated Paper is the only media that is compatible with both the

HP DesignJet CP Ink System and the HP DesignJet CP Ink System UV. Therefore,
if you have changed the Ink System and the media you are loading is incompatible
with the new Ink System, the printer will automatically reject the non-compatible
media. See page 3-2, Choosing Media.

12'' / 305mm

42'' / 1067mm

54''/1372mm

36''/915mm

50''/1270mm

C4723118