HP 3000CP - Manual (Page 195)

Reconfiguring Your Printer
Changing the Interface Settings
8-11
Upgrading Your Printer with More Memory
3500CP Only Your printer comes with 36 MB of memory (4 MB of main memory plus a 32-MB
SIMM) plus 4 MB of internal printing memory. You can expand the memory up to a
maximum of 68 MB by adding additional 4-MB, 8-MB, 16-MB, and 32-MB
memory expansion modules. In addition to this memory, the printer has an internal
hard disk drive used as extended memory for PostScript rendering and print
management.
If you occasionally get “Out of memory” error messages when printing, this may be
an indication that you need to add more memory to your printer. Adding memory
may also slightly improve performance when printing some files.
3000CP Only Your printer comes with 12 MB of memory (4 MB of main memory plus a 8-MB
SIMM) plus 4 MB of internal printing memory. You can expand the memory up to a
maximum of 68 MB by adding additional 4-MB, 8-MB, 16-MB, and 32-MB
memory expansion modules.
See page 13-18, Ordering Accessories, for HP part numbers for the memory
modules. For installation details, see the Setup Guide supplied with the printer.