HP 3000CP - Manual (Page 296)

Front-Panel Messages
Message Explanations and Actions
12-14
Replace mixed
printhead(s)
■■●■
One of the printheads inserted into the printer is of a different ink system to the
others.
Remove the incorrect printhead and replace with a printhead which is of the same
type of ink system as the others.
Replace printhead(s)
■■❏■ You are in the ink system replacement process, and lifted the window when
instructed.
The printer is waiting for you to replace the printheads indicated by flashing squares.
(If you have persistent problems, see
If You Have Problems Reseating a
Printhead 11-41 .)
Replace printhead(s)
Close window You are in the ink system replacement process, and lifted the window when
instructed.
The printer is waiting for you to replace a printhead, or you can close the window
without making any changes. (If you have persistent problems, see
If You Have
Problems Reseating a Printhead 11-41 .)
Replace
■■■*
Close right door
You are in the ink system replacement process, and opened the right door when
instructed.
The printer is waiting for you to replace the printhead cleaners indicated by *s, and
then close the right door.
Replacement of ink
system recommended
→
You are about to finish the ink system replacement process, and the printer
recommends replacing one or more of the four ink systems (for example, because
they have passed their specified life).
Press the
↓ key to continue. You will see the status message “Low on ink”. Then press
the Replace Ink System key to replace the ink systems that will be indicated.
Replacement of lens
cover recommended
→
The printhead alignment procedure, or the printhead check procedure, or a calibration
check has failed because the lens cover is dirty and needs replacing. Printing may
continue but the image quality is not assured.
Press
↓ to continue. See the instructions for lens cover replacement on page 10-3,
Lens Maintenance. Spare lens covers are inside the right door.
Roll empty
Load new roll You have used all of the media roll.
Load a new roll of media.
Roll misaligned
Reload roll Roll media is skewed.
Reload media.
Message Explanation and Action