Turning on the take up reel – HP 3000CP User Manual

Page 196

Text mode
Original mode

Reconfiguring Your Printer
Turning on the Take Up Reel

8-12

Turning on the Take Up Reel

The Take Up Reel enables you to have very long prints without the need for you to
be present. As the media is printed, it is automatically wound onto the Take Up Reel
spindle.

NOTE:The default for the Take Up Reel is On.

1 When the Front Panel displays Ready press Enter.

NOTE:If the front panel does not display Ready press the Previous key until it does.

2 Use the

↑ or ↓ keys until the front panel displays Device Setup. Then press the

Enter key.

3 Use the

↑ or ↓ key until the display shows:

4 Use the

↑ or ↓ key until the display shows ON. Then press Enter to turn the Take

Up Reel on.

NOTE:When the Take Up Reel is turned on:

■ The cutter is turned off and will only work if the Form Feed and Cut button is

C4704030

Device Setup

Enter

C4704034

Take Up Reel =Off

C4704034

Take Up Reel=On