HP 3000CP User Manual

Page 75

Working with Media

Take Up Reel loading

3-23

6 Use a small amount of sticky tape (see note below) to attach the media to the core.

Use three strips, one at each side of the media and one in the middle. Stick the
middle one first.

NOTE:Use only tape which will not tear the media when it is removed later.

NOTE:To avoid the media skewing as it is wound onto the Core tube, ensure the
media is straight when it is attached.

7 Press the

↓ key to advance the media. Enough media should be advanced so that the

media can wrap at least once around the core so securing it fully onto the Take Up
Reel.

C472335

Make sure the media is
straight with no creases

C4704016

Back Media --------->

Forward Media ---->

Advance about this
much media

C472336