HP 3000CP - Manual (Page 187)

Reconfiguring Your Printer
Viewing the Current Overall Configuration of the Printer
8-3
HP-GL/2 Configuration Print
Item Comments
Queueing & Nesting The current queueing and nesting settings in the front-
panel menu.
Utilities The current menu mode setting (Full or Short).
Utilities -> Statistics
Max X
Max Y These two figures, in millimeters, give the size of the
current printing area, that is, the area in which the printer
will print the next page unless it is changed. Normally
each file received sets these dimensions with its Page Size
command.
■
Printing area = page size minus margins.
■
X represents the vertical (paper path) axis.
■
Y represents the horizontal (carriage path) axis.
Code rev The revision number of the printer’s internal code.
RAM present The size, in megabytes, of the printer’s main standard
memory, plus the amount of memory reserved for
printing. This is the total RAM, not the RAM currently
free.
Ink This is the type of ink installed in the printer.
Media The media type which the printer currently selected in the
front panel. For an explanation of media types, see page
3-4, Supported Media Types.
Language Current language used in the front panel and on internal
prints.
INTERNAL PRINTS
HP-GL/2 config.
All menu modes