HP 3000CP - Manual (Page 122)

Working with Ink Systems
Replace the Ink System
4-22
7 Close the left door on the printer.
After the left door is closed, The front panel displays the message “STATUS,
Checking ink system” while the printer checks that all ink system components have
been installed correctly. This may take a few minutes.
Components
Installed Correctly If all components have been installed correctly, the front panel displays “Install
complete”.
Components
Installed Incorrectly If any components have been installed incorrectly, the front panel will prompt you
to take the appropriate action to correct the problem. See chapter 12, Front-Panel
Messages, for information about any messages that are displayed in the front panel.
Next Step Go to After replacing the Ink System on the next page for information on the
alignment and calibration checks performed by the printer after ink system
replacement.
C4704103