Honeywell UDC2500 - Manual (Page 46)

Configuration
32 UDC2500 Universal Digital Controller Product Manual 4/07
3 Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Table 3-1 shows an overview of the prompt hierarchy as it appears in the controller.
What’s in this section?
The following topics are covered in this section.
Table 3-1 Configuration Topics
TOPIC See Page
3.1 Overview 32
3.2 Configuration Prompt Hierarchy 33
3.3 Configuration Procedure 34
3.4 Tuning Set Up Group 35
3.5 SP Ramp Set Up Group 38
3.6 Accutune Set Up Group 43
3.7 Algorithm Set Up Group 46
3.8 Output Set Up Group 51
3.9 Input 1 Set Up Group 55
3.10 Input 2 Set Up Group 59
3.11 Control Set Up Group 61
3.12 Options Set Up Group 67
3.13 Communications Set Up Group 73
3.14 Alarms Set Up Group 76
3.15 Display Set Up Group 82
3.16 P.I.E. Tool Ethernet and Email Configuration Screens 84
3.17 Configuration Record Sheet 87