Honeywell UDC2500 User Manual

Page 174

Troubleshooting/Service

160

UDC2500 Universal Digital Controller Product Manual

4/07

Customer support

If you cannot solve the problem using the troubleshooting procedures listed in this
section, you can get technical assistance by dialing 1-800-423-9883 USA and Canada.

An engineer will discuss your problem with you. Please have your complete model
number, serial number, and Software version available. The model and serial
numbers can be found on the chassis nameplate. The software version can be viewed
under Setup Group “Status.” See Table 7-1.

If it is determined that a hardware problem exists, a replacement controller or part will be
shipped with instructions for returning the defective unit.

Do not return your controller without authorization from Honeywell’s Technical
Assistance Center or until the replacement has been received.

Check out Honeywell’s web site at http://www.honeywell.com/ps.

Determining the software version

Table 7-1 lists the procedure for identifying the software version number.

Table 7-1 Procedure for Identifying the Software Version

Step

Operation

Press

Result

Select
STATUS
Set Up Group

Setup

Upper Display

= READ

Lower Display

= STATUS

Read the software
version

Function

You will see:

Upper Display

= Software version number

32xx

Lower Display

= VERSION

Please give this number to the Customer Support person. It
will indicate which version of UDC2500 you have and help
them determine a solution to your problem.