HP 9000 V2600 SCA - Manual (Page 127)

Chapter 5 105
Configuration utilities
xconfig
The main xconfig window has three sections:
• Menu bar—Provides additional capability and functions.
• Node configuration map—Provides the status of the node.
• Node control panel—Provides the capability to select a node and
control the way data flows to it.
Menu bar
The menu bar appears at the top of the xconfig main window. It has
four menus that provide additional features:
• File menu—Displays the file and exit options.
• Memory menu—Displays the main memory and CTI cache memory
options.
• Error Enable menu—Displays the device menu options for error
enabling and configuration.
• Help menu—Displays the help and about options.
The menu bar is shown in Figure 59.
Figure 59 xconfig window menu bar
The File menu provides the capability to save and restore node images
and to exit
xconfig .
The Memory menu provides the capability to enable or disable memory
at the memory DIMM level by the total memory size and to change the
network cache size on a multinode complex.
The Error Enable menu provides the capability to change a device’s
response to an error condition. This is normally only used for
troubleshooting.
The Help menu provides a help box that acts as online documentation
and also contains program revision information.