HP 8000M - Manual (Page 248)

7-20
Monitoring and Analyzing Switch Operation
IP Multicast (IGMP) Status
M
oni
to
ri
n
g
and
An
al
yz
in
g
Sw
itc
h
Op
e
ra
tio
n
You can also display the port status of the individual multicast groups. (That
is, you can display the ports, port types, and whether the IGMP devices
connected to the switch via the port are hosts, routers, or both.) To do so,
select the group from the above screen and press
[S] for Show ports. For
example, suppose you wanted to view the status of the IP multicast group
224.0.1.24 shown in the above screen. You would highlight the row beginning
with that group number, then press
[S]. You would then see a screen similar
to the following:
Figure 7-17. Example of an IGMP Status Screen for a Selected Multicast Group