Blackmagic Design DeckLink Studio 4K Capture & Playback Card - Manual (Page 14)

Using Blackmagic System Preferences 14
Use 4:4:4 SDI on video output when possible
Select this setting when outputing 4:4:4 video. 1080p50/60 video will always be output as 4:2:2. When 4:4:4
video output is enabled, the following features are not available:
‚ simultaneous HD and down converted SD video output
‚ down converted analog video output
Use 3/6Gb SDI not Dual Link SDI output
Select this setting to use single link 3G or 6G SDI when using high bandwidth formats such as 1080p60, 4:4:4
or when using 4K formats.
Use 1080p not 1080PsF
Select this setting to output true progressive frame video instead of progressive segmented frame.
Remove field jitter when video is paused
Select this setting to eliminate field flicker when interlaced video is paused on old CRT monitors by displaying
a single field. This option is not recommended for modern flat screens.
Use LTC Timecode input
Select this setting to read timecode from the LTC input instead of the SDI stream.
Tick the checkbox to output 4:4:4 video.
Tick the checkbox to use single link 3G or 6G SDI.
Tick the checkbox to output true 1080 progressive frame video.
Tick the checkbox to eliminate field flicker from CRT monitors.
Tick the checkbox to read timecode from the LTC input.