Blackmagic Design DeckLink Studio 4K Capture & Playback Card - Manual (Page 13)

Using Blackmagic System Preferences 13
The Settings Tab
Set output
Set the video and audio output connections for your Blackmagic video hardware. Some models allow you to
choose between component analog video, S-Video or composite analog video. And some models feature
switchable audio outputs which allow you to choose between analog and AES/EBU.
Set input
Set the video and audio input connections for your Blackmagic video hardware. Your hardware may
support some or all of the following combinations:
‚ SDI Video & SDI Audio
‚ SDI Video & AES/EBU Audio
‚ SDI Video & Analog XLR Audio
‚ Optical SDI Video & Optical SDI Audio
‚ HDMI Video & HDMI Audio
‚ HDMI Video & AES/EBU Audio
‚ HDMI Video & Analog XLR Audio
‚ Component Video & AES/EBU Audio
‚ Component Video & Analog XLR Audio
‚ Composite & AES/EBU Audio
‚ Composite & Analog XLR Audio
‚ S-Video & AES/EBU Audio
‚ S-Video & Analog XLR Audio
Use video setup in NTSC
Select the 7.5 IRE setup for the NTSC composite video used in the USA and some other countries. Select
the 0 IRE setup if you’re working in Japan or other countries that don’t use the 7.5 IRE setup. PAL and high
definition formats do not use this setting.
Video and Audio output connections.
Video and Audio input connections.
Select either 7.5 IRE or 0 IRE setup for NTSC composite video.