Epson WorkForce Pro WF-C4310 Wireless Color Printer User Manual

Page 36

10. Press the

home button to exit.

You see the

icon on the LCD screen and should be able to connect to your product directly from

your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the

Start Here

sheet.

Note:

If you don't see the

icon, you may have selected the wrong network name or entered the

password incorrectly. Repeat these steps to try again.

Parent topic:

Wi-Fi Infrastructure Mode Setup

Setting Up Wireless Printing from a Smartphone or Tablet

You can use the Epson Smart Panel app to connect your Epson product to a wireless network or
connect your device directly to the product. Epson Smart Panel is available on iOS and Android devices.

Make sure you have the following:

• A Bluetooth-enabled device that is connected to a wireless network

• The Epson Smart Panel app installed on the device

• The wireless network name (SSID) and password

Note:

Your device must be close enough to the product to create and maintain a Bluetooth connection.

Make sure the product is turned on and is ready to print.

Note:

You must perform initial setup and ink installation before setting up wireless printing.

Open the Epson Smart Panel app on your device.

Do one of the following:

• If the app automatically recognizes the product, follow the on-screen instructions to set up the

wireless connection.

• If the app does not automatically recognize the product, select the

icon and continue with the

next step.

On the next screen, select

Start setting up

and follow the on-screen instructions.

Note:

If your product is not listed, move closer to the product and try again. If the product is still not

shown, connect your printer to the wireless network using the control panel and then select

Connect