Epson WorkForce Pro WF-C4310 Wireless Color Printer - Manual (Page 164)

164
• If the USB cable is not recognized, try using a different USB cable.
Parent topic: Solving Setup Problems
Related references
Windows System Requirements
Mac System Requirements
Related tasks
Selecting Wireless Network Settings from the Control Panel
Setting Up Wireless Printing from a Smartphone or Tablet
Solving Network Problems
Check these solutions if you have problems setting up or using your product on a network.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
Cannot Print Over a Network
Network Software Cannot Find Product on a Network
Product Does Not Appear in Mac Printer Window
Wireless Network Connection is Unstable on a Mac
Wired Network Connection Becomes Unstable
USB Connection Problems
Parent topic: Solving Problems
Cannot Print Over a Network
If you cannot print over a network, try these solutions:
• Make sure that your product is turned on.
• Make sure you install your product's network software as described in your product documentation, or
contact your system administrator.
• Print a network status sheet and verify that the network settings are correct. If the network status is
Disconnected , check any cable connections and turn your product off and then on again.
• Print a network connection report and check the codes and messages on the report to help determine
the cause of the problem.