Paper jam problems, Paper ejection problems, Paper jam problems paper ejection problems – Epson WorkForce Pro WF-C4310 Wireless Color Printer User Manual

Page 173

173

Parent topic:

Related references

Paper Loading Capacity
Paper Specifications

Paper Jam Problems

If a paper jam occurs in the product, a message appears on the LCD screen. Follow the on-screen
instructions to locate the paper jam and remove the paper.

If any torn pieces of paper remain inside the product, use the arrow buttons to select

Maintenance

Remove Paper

Start

after clearing the paper jam error.

Caution:

Never touch the buttons on the control panel while your hand is inside the product. If the

product starts operating, it could cause an injury. Be careful not to touch the protruding parts to avoid
injury. Remove the jammed paper carefully or you may damage the product.

Parent topic:

Solving Paper Problems

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:

• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.

Select the correct paper size when you reprint.

• If paper falls from the output tray, extend the paper stopper.

• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select

the correct paper type setting when you reprint.

• If you are using letterhead paper, select the appropriate paper type setting.

• Clean the roller inside the printer to remove any dust on the paper path.

Parent topic:

Solving Paper Problems