Running a product check – Epson WorkForce Pro WF-C4310 Wireless Color Printer User Manual
Page 161
161
Network Connection Report Codes and Messages
Where to Get Help
Related tasks
Loading Paper in the Cassette
Removing and Installing Ink Cartridges
Replacing the Maintenance Box
Accessing the Web Config Utility
Configuring a Server Certificate for the Product
Checking the Number of Sheets on the LCD Screen
Related topics
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1.
Disconnect any interface cables connected to your product.
2.
Load plain paper in the product.
3.
Press the
home button, if necessary.
4.
Use the arrow buttons to select
Maintenance
>
Print Head Nozzle Check
and press the
OK
button.
5.
Press the
OK
button to select
.
The nozzle pattern prints.
6.
Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this book or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic:
Related concepts