Cleaning the paper guide – Epson WorkForce Pro WF-C4310 Wireless Color Printer User Manual
Page 149
149
2.
Load a few sheets of plain paper in the product.
3.
Press the
home button, if necessary.
4.
Use the arrow buttons to select
Maintenance
and press the
OK
button.
5.
Select
Print Quality Adjustment
and press the
OK
button.
6.
Follow the on-screen instructions to print a nozzle check pattern.
7.
Check the printed pattern.
8.
Do one of the following:
• If there are no gaps, select
O
and press the
OK
button.
• If there are gaps or the pattern is faint, select
X
and press the
OK
button.
9.
Follow the on-screen instructions to print an alignment sheet.
Note:
Do not cancel printing while you are printing head alignment patterns.
10. Continue following the on-screen instructions to finish the print quality adjustment.
Parent topic:
Related tasks
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1.
If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this
size: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
2.
Press the
home button, if necessary.
3.
Use the arrow buttons to select
Maintenance
and press the
OK
button.
4.
Press the down arrow button, select
Paper Guide Cleaning
and press the
OK
button.
5.
Follow the on-screen instructions to clean the paper guide.
6.
Repeat these steps as necessary until the paper comes out clean.
Parent topic:
Related tasks