Epson WorkForce Pro WF-C4310 Wireless Color Printer - Manual (Page 198)

198
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n/a/ac
Security WPA2-PSK (TKIP/AES); complies with WPA2 standards with
support for WPA/WPA2 Personal
WPA3-SAE (AES)
WEP (64/128 bit)
Note: Wi-Fi Direct only supports WPA2-PSK (AES).
Frequency band 5 GHz
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP)
Note: Wi-Fi Direct Simple AP mode is available even if you connect
the product to an Ethernet network. Wi-Fi Direct is not supported on
IEEE 802.11b.
Ethernet
Standard IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet)**
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
** Connected devices should comply with IEEE802.3az standards.