Epson WorkForce Pro WF-C4310 Wireless Color Printer - Manual (Page 162)

162
Related references
Where to Get Help
Related tasks
Loading Paper in the Cassette
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Use the arrow buttons to select Settings > Restore Default Settings and press the OK button.
3. Select one of these options:
• Network Settings : Resets all network settings
• All Except Network Settings : Resets all settings except for network settings
• All Settings : Resets all control panel settings
You see a confirmation screen.
4. Use the arrow buttons to select Yes (if you want to reset the selected settings), or No (to cancel the
operation) and press the OK button.
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Product Does Not Turn On or Off
Noise After Ink Installation
Software Installation Problems
Parent topic: Solving Problems