PLANET WGSW-5242 - Manual (Page 270)

User’s Manual of WGSW-5242
270
Mode
Interface Config
speed
Description:
Set port speed to 10Mbps half duplex/ 10Mbps full/ 100Mbps half/ 100Mbps full/ 1000Mbps 100FX mode/1000base-x full .
Syntax:
speed
{10hd | 10fd | 100hd | 100fd | 1000fd | 100fx | 1000base-x}
Parameters:
{10hd | 10fd | 100hd | 100fd | 1000fd | 100fx | 1000base-x}
Mode
Interface Config
flow-control
Description:
This command enable/disable flow-control on ports.
Syntax:
flow-control
{enable | disable}
Parameters:
{enable | disable}
Mode
Interface Config
6.4.6 Port-security Command
port-security lock-mode dynamic max-entries 24
Description:
This command enable limited dynamic lock mode,and specify maximin learning entries for limited dynamic lock mode.the
max-entries value :0~24
Syntax:
port-security lock-mode dynamic max-entries 24
Mode
Interface Config
port-security none
Description:
This command specifies port-based qos priority mapping.