PLANET WGSW-5242 - Manual (Page 136)

User’s Manual of WGSW-5242
136
The LLDP port settings relate to the currently selected stack unit, as reflected by the page header.
Object Description
• Chassis ID SubType Identifies the chassis containing the IEEE 802 LAN entity associated with the
transmitting LLDP agent. There are several ways in which a chassis may be
identified and a chassis ID subtype is used to indicate the type of component
being referenced by the chassis ID field. The Managed Switch uses MAC
Address
as Chassis ID.
• Chassis ID The Chassis ID is the identification of the Managed Switch's LLDP frames.
• System Name Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
• System Description Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
• System Capabilities Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information advertised
by this TLV is described in IEEE 802.1AB.
• Enable Capabilities The capabilities that define the primary function(s) of the system.
• MED Device Type Display the information included in the MED TLV field of advertised messages.
• Management
Addresses
Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement. The management
address TLV may also include information about the specific interface associated
with this address, and an object identifier indicating the type of hardware
component or protocol entity associated with this address
• Port ID SubType Identifies the chassis containing the IEEE 802 LAN entity associated with the
transmitting LLDP agent’s interfaces.
• Port ID The Port ID is the identification of the Managed Switch’s port.
ID Basis Reference
Chassis component EntPhysicalAlias when entPhysClass has a value of
‘chassis(3)’ (IETF RFC 2737)
Interface alias IfAlias (IETF RFC 2863)
Port component EntPhysicalAlias when entPhysicalClass has a value
‘port(10)’ or ‘backplane(4)’ (IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)