PLANET WGSW-5242 - Manual (Page 259)

User’s Manual of WGSW-5242
259
dhcpsnooping vlan
Description:
This command is used to configure dhcp vlan.
dhcpsnooping vlan add
Description:
This command is used to enable dhcp snooping in a specified vlan.
Syntax:
dhcpsnooping vlan add
from to
Parameters:
Mode
Global Config
dhcpsnooping vlan remove
Description:
This command is used to disable dhcp snooping in a specified vlan.
Syntax:
dhcpsnooping vlan remove
from to
Parameters:
Mode
Global Config
dhcpsnooping static
Description:
This command is used to configure dhcp static entry.
dhcpsnooping static add ip
Description:
This command is used to add a static dhcp entry.
Syntax:
dhcpsnooping static add ip
mac port vid
Parameters: