PLANET WGSW-5242 - Manual (Page 251)

User’s Manual of WGSW-5242
251
access-list name set L4port
Description:
This command specifies the TCP/UDP port range.
access-list name set l4port SRC-port SRE-port
Description:
This command specifies the source TCP/UDP port range.
Syntax:
Access-list name <WORD> set L4 port SRE-port
from <1-65535> to <1-65535>
Parameters:
<1-65535>
Mode
Global Config
access-list name set l4port DST-port
Description:
This command specifies the destination TCP/UDP port range.
Syntax:
access-list name <WORD> set l4port DST-port
from <1-65535> to <1-65535>
Parameters:
<1-65535>
Mode
Global Config
access-list name set IP-mode packet-type
Description:
This command specifies the packet type.
Syntax:
access-list name <WORD> set IP-mode packet-type
{ICMP|IGMP|IP|TCP|UDP|GRE}
Parameters:
{ICMP|IGMP|IP|TCP|UDP|GRE}
Mode
Global Config
access-list name set mac-mode
Description:
Specify ACL entry priority.