PLANET WGSW-5242 - Manual (Page 268)

User’s Manual of WGSW-5242
268
6.4.4 LLDP Command
An lldp agent can transmit information about the capabilities and current status of the system associated with its MSAP identifier.
The lldp agent can also receive information about the capabilities and current status of the system associated with a remote
MSAP identifier. However, lldp agents are not provided any means of soliciting information from other lldp agents via this
protocol.
lldp state
Description:
Only transfer the lldp status
Syntax:
lldp state
{tx | rx | tx_rx | disable}
Parameters:
{tx | rx | tx_rx | disable}
Mode
Interface Config
lldp notifications
Description:
Enable/disable notification form the agent
Syntax:
lldp notification
{enable|disable}
Parameters:
{enable|disable}
Mode
Interface Config
lldp tlvs-tx
Syntax:
lldp tlvs-tx
{enable | disable} option basic {port-desc | sys-name | sys-desc | sys-capa }
Parameters:
{enable | disable}
{port-desc | sys-name | sys-desc | sys-capa }
Mode
Interface Config
802.1 set
Description:
Status of local-802.1 settings