PLANET WGSW-5242 - Manual (Page 213)

User’s Manual of WGSW-5242
213
log log-server name add
Description:
This command is used to specify log server name, enter a name, up to 12 characters, add a log server IP address
Syntax:
log log-server name <WORD> add
ipaddr word
Parameters:
<WORD>
Mode
Global Config
log log-server name delete
Description:
This command is used to delete a log server
Syntax:
log log-server name <WORD> delete
Parameters:
<WORD>
Mode
Global Config
log logging-target
Description:
This command is used to configure log notification level
log logging-target memory
Description:
This command is used to specify memory log notify-level
Syntax:
log logging-target memory
{enable|disable}
Parameters:
{enable|disable}
Mode
Global Config
log logging-target flash
Description:
This command is used to specify flash log notify-level
Syntax: