PLANET WGSW-5242 User Manual
Page 150
User’s Manual of WGSW-5242
150
Severity Type
Severity
Level
Description
Example
Emergency
0
The system is not functioning.
Memories overflow.
Alert
1
The system needs immediate attention.
Main system memory pool
overflow.
Critical
2
The system is in a critical state.
Cannot bind to SNMP.
Error
3
A system error has occurred.
Failed to delete entry.
Warning
4
A system warning has occurred.
Port down.
Notice
5
The system is functioning properly, but system notice
has occurred.
Bad route.
Informational
6
Provides device information.
Link up.
Debug
7
Provides detailed information about the log. If a Debug
error occurs, contact Dell Online Technical Support
Method list created.
The Server Logs screen contains information for viewing and configuring the Remote Log Servers. New log servers can be
defined, and the log severity sent to each server.
Figure 4-11-17
Log Server Screenshot
The page includes the following fields:
Object
Description
•
Server Name
Specifies a short name for identifying this server.
•
Server IP Address
Specifies IP address of the server inn dotted decimal notation.
•
Service UDP Port
Specifies UDP port of the server. The possible range is 1 to 65535.
The default value is 514.
•
Facility
Specifies t he f acility v alue to be us ed w hen l ogs are r ecorded in t he r emote
server. See RFC 3164 for more details.