Arp static, 20 dos command, Dos land – PLANET WGSW-5242 User Manual

Page 254

User’s Manual of WGSW-5242

254

This command set add/remove dynamic arp on specified vlan.

Syntax:

arp dynamic vlan

{add|remove} from < vlan -id> to < vlan -id>

Parameters:

{add|remove}

< vlan -id>

Mode

Global Config

Example

Swtich# arp dynamic vlan add from 1 to 1

Swtich# arp dynamic vlan remove from 1 to 1

arp static

Description:

This command set arp static address table for mac address with IP Address.

Syntax:

arp static

{add|delete} vid <1~4094> ip mac

Parameters:

{add|delete}

<1~4094>

Mode

Global Config

6.3.20 Dos Command

dos land

Description:

This command enables and disables land-type attacks prevention.

Syntax:

dos land

{enable|disable}

Parameters:

{enable|disable}

Mode

Global Config