10 network command, Network mgmt-vlan, Network parms – PLANET WGSW-5242 User Manual

Page 219: Network protocol, Network dhcp-relay, Network dhcp-relay mode

User’s Manual of WGSW-5242

219

6.3.10 Network Command

network mgmt-vlan

Description:

This command changes management vlan.

Syntax:

network mgmt-vlan

<vlan-ID>

Parameters:

<vlan-ID>

Mode

Global Config

network parms

Description:

This command configures static IP address of the switch.

Syntax:

network parms

<IP addr> <subnet mask> <gateway>

Parameters:

<IP addr> <subnet mask> <gateway>

Mode

Global Config

network protocol

Description:

This command configure switch dhcp client.

Syntax:

network protocol

{dhcp|none}

Parameters:

{dhcp|none}

Mode

Global Config

network dhcp-relay

Description:

Configure switch dhcp relay functions.

network dhcp-relay mode

Description: