PLANET WGSW-5242 - Manual (Page 256)

User’s Manual of WGSW-5242
256
dos ports synack-flooding
Description:
This command enables and disables SYNACK -flooding -type attack prevention. Set rate is 64 kbps or 128kbps for port lists
(1, 3-5, 7-9.11)
Syntax:
dos ports synack -flooding
{enable|disable} rate {64|128}
Parameters:
{enable|disable}
{64|128}
Mode
Global Config
Example
Switch#dos ports synack -flooding enablerate 64 1-4
Switch#dos ports synack -flooding enablerate 64 5
6.3.21 Tacplus Command
tacplus authen_type
Description:
This command is used to set authentication type. There are three types for selecting: local, tacplus, localandtacplus.
Syntax:
tacplus authen_type
{local | tacplus | localandtacplus}
Parameters:
{local | tacplus | localandtacplus}
Mode
Global Config
tacplus add server
Description:
This command is used to add a new TACACS+ server and set server IP address, priority, key string, authentication port and
timeout for reply.
Syntax:
tacplus add server
priority <0-65535> key port timeout <1-30>
Parameters:
<0-65535>
<1-30>