PLANET WGSW-5242 - Manual (Page 111)

User’s Manual of WGSW-5242
111
The page includes the following fields:
Object Description
• Enable SSH Whether or not to activate the SSH daemon inside the switch. Login will be denied if that
deamon is inactive.
• Save Settings Save current settings for SSH.
• Change Key Change the public key used for encryption. But please note, that key cannot be changed if
any clients are currently connected.
4.7.10 HTTPS

Getting started with HTTPS setting
Hypertext Transfer Protocol over Secure Socket Layer or HTTPS is a URI scheme used to indicate a secure HTTP connection.
It is syntactically identical to the http:// scheme normally used for accessing resources using HTTP. Using an https: URL
indicates that HTTP is to be used, but with a different default TCP port (443) and an additional encryption/authentication layer
between the HTTP and TCP.
Figure 4-7-23
HTTPs configuration Screenshot
The page includes the following fields:
Object Description
• Enable HTTPs HTTPS enable Enable HTTPS for security access.
HTTPS disable Disable HTTPS.
4.7.11 Telnet
Telnet is a network protocol used on the Internet or local area networks to provide a bidirectional interactive text-oriented
communications facility using a virtual terminal connection. User data is interspersed in-band with Telnet control information in
an 8-bit byte oriented data connection over the Transmission Control Protocol (TCP).
Figure 4-7-24
HTTPs configuration Screenshot