PLANET WGSW-5242 - Manual (Page 158)

User’s Manual of WGSW-5242
158
4.11.17 Self Loop Detection
Self Loop Detection means when one port produces a self loop and Switch can detect this situation. When it happens, the port
will be disabled. After a recover time's later switch will enable this port and try to detect this port again until there is no self loop
on this port.
Figure 4-11-25
Self Loop Detection Screenshot
The page includes the following fields:
Object Description
• Enable Port Self
Loop Detection
Enable or Disable port self loop detection function on the Managed Switch.
• Recover Time
(Seconds)
Specifies port recover time value, 0 indicate the port will not auto recover.
4.11.18 BOOTP Configure Download
BOOTP Configure Download is a feature of download switch configure file from the special TFTP server automaticly. Enable
DHCP Client and DHCP Server assigned the Switch IP Address, at the same time the Switch can acquire the Option 66/67
message (bootp file name & TFTP server IP) from the DCHP Packet or BOOTP Packet. According to these message, Switch
use tftp client download the special configure file from the special TFTP Server. When switch download succeed, these
message will be saved. Next time Switch get the different file name or TFTP server IP, and try to download the new configure file
again.
Figure 4-11-26
BOOTP Configure Download Screenshot
Enable DHCP Client and should have a DHCP Server or BOOTP Server support Option 66/67.