Extron Electronics MLC 104 Plus Series - Manual (Page 173)

B-3 MLC 104 Plus Series • Firmware Updates
PRELIMINAR
Y
4. In the factory default Web pages, select the Status tab, System Status page.
The firmware version is listed in the System Description area of the System
Status area, as shown below.
Or select the System Settings page within the Configuration tab. The
firmware version is listed in the IP Settings area, as shown below.
If using the GlobalViewer pages, click on the Type button and click on the
MediaLink Controller
folder. The firmware version is listed in the System
Description area, as shown in the following picture.