Extron Electronics MLC 104 Plus Series - Manual (Page 72)

SIS ™ Programming and Control, cont’d
MLC 104 Plus Series • SIS Programming and Control 4-8
PRELIMINAR
Y
Command
ASCII (T
elnet
)
(host to MLC
)
URL Encoded (W
eb
)
(host to MLC
)
Response (MLC to host
)
Additional description
Input selection
Select an input
14, 22
X20)
!
X20)
%21
Chn
X20)
]
Select input
X20)
(
X20)
= 1, 2, 3, 4) (audio
and video).
14
= The MLC r
esponds with an E14 err
or
code (invalid for this configuration) if the desir
ed input is not set up to switch inputs
(is not in input button mode). Events ar
e
still trigger
ed, though.
22
= The MLC sends a “busy” r
esponse (E22)
if switching functions ar
e locked.
Display (pr
ojector
) power
Turn display power on
1P
1P
Pwr
X20*]
On (discr
ete).
Turn display power of
f
0P
0P
Pwr
X20*]
Of
f (discr
ete).
V
iew display power status
P
P
X20*]
Show the display power status.
Example:
P
P
2
]
Example:
the display is powering of
f.
Set power status
X20*
*0P
X20*
%2A0P
Pwr
X20*]
This command is used only by scripts. It pr
ovides a way to set the power status to
match the actual state of the pr
ojector
.
For
X20*
:
0 = display power is of
f
1 = display power is on (default) 2 = display is powering down/of
f
3 = display is powering on (warming up).
N
This command does not trigger the warm up/cool down (power on/power off) sequences or the button’
s events.
Display mute
N
The 1M and 0M commands emulate the IR 402’
s Display Mute On and Display Mute Off buttons. Y
ou must pr
ogram these buttons on the r
emote for the 1M and 0M
commands to function.
Turn display mute on
1M
1M
Mut
X21^]
Mute.
X21^
= 0 (of
f), 1 (on),
or 2 (unknown).
Turn display mute of
f
0M
0M
Mut
X21^]
Unmute.
V
iew display mute status
M
M
X21^]
Show display mute status.
Set mute status
X21^
*0M
X21^
%2A0M
Mut
X21^
]
This command is used only by scripts. It pr
ovides a way to set the status to match the
actual state of the pr
ojector
.
N
This command does not trigger button events.
Command/r
esponse table for SIS commands