System settings, Passwords, System settings -18 passwords -18 – Extron Electronics MLC 104 Plus Series User Manual
Page 58: Preliminar y, Software-based configuration and control, cont’d
Software-based Configuration and Control, cont’d
MLC 104 Plus Series • Software-based Configuration and Control
3-18
PRELIMINAR
Y
System Settings
This is for IP, date/time, and executive mode (front panel lockout) setting changes.
N
Unit Name is any name (e.g., Room108MLC104IPplus, Lab1234mlc104 IP,
ConfRoomSystem, LectureHall8‑cntrlr) you use to label this specific MLC. The
default is a combination of the product name and part of the hardware address.
This can be changed to your choice of alphanumeric characters and hyphens (‑).
• Spaces ( ) and underscores (_) are not permitted within a unit’s name.
• Valid characters are A-Z, a-z, 0-9, and - (hyphen).
• The name cannot start with a number or hyphen. It cannot end with a hyphen.
• Maximum length is 24 characters.
Passwords
In the Passwords page you can change the administrator and/or user passwords.
N
Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive. A minimum of 4
characters are required when creating passwords via the Web pages.