Extron Electronics MLC 104 Plus Series - Manual (Page 56)

Software-based Configuration and Control, cont’d
MLC 104 Plus Series • Software-based Configuration and Control 3-16
PRELIMINAR
Y
Status
The Status Web pages provide only settings information. Changes must be made
via the Configuration Web page or via the Global Configurator software or SIS
programming. Personnel who have user access can view these pages but do not
have access to configuration pages.
System Status
The System Status page provides information about the MLC’s model, part
number, firmware level, voltages and internal temperatures, port and IP settings,
and the status of projector lamp hours and the display connection, as shown in the
following example. This information is useful when troubleshooting problems.
N Projector lamp hours are a reflection of time elapsed since the lamp was changed
as determined by the driver/events associated with the MLC’s Display RS‑232/
IR port.