EXP Computer ThinConnect4 - Manual (Page 91)

ThinConnect4 <81>
2. Enter IP Address in “RAS Server IP Address” and “RAS Client IP Address”.
Do not to overlap another IP Address. But, it is possible to set the same IP
Address of ThinConnect4 in “RAS Server IP Address”. If you have selected the “Same
as LAN Port”, the ThinConnect4 IP Address will be set in “RAS Server IP Address”
fields.
If you wish to have the IP address assigned from DHCP server, check the
“Use DHCP on ThinConnect4 to assign IP addresses” check box.
The value in the above window is only for reference. Enter the appropriate
setting to meet with your LAN environment.
The RAS Client IP Address used during a connection to RAS Server is assigned by RAS
Server. If ThinConnect4 is functioning as a RAS Server, it will set RAS Client to IP
Address acquisition mode.