EXP Computer ThinConnect4 - Manual (Page 27)

ThinConnect4 <17>
4. Click the Gateway tab.
In the “New gateway”, put in the ThinConnect4 IP address (Default 192.168.0.1).
Click the “Add” button. New Gateway IP address will be added into the “Installed
Gateways”.
Note: If you change the ThinConnect4 IP address, make sure the “Installed
gateway” IP address match the ThinConnect4 IP address.
Otherwise the ThinConnect4 Setup Utility will report “No ThinConnect4 on
your network” and prevent further configuration.
The Gateway setting mismatch is the most common mistake in setting the
ThinConnect4 with LAN system.