EXP Computer ThinConnect4 - Manual (Page 41)

ThinConnect4 <31>
3. If all information is correct, click the “OK” button.
The value in the window is just an
example. Please enter your
proper setting to meet with your
LAN requirements.
4. Click the “Update” button.
5. Click the “OK” to overwrite the settings made to ThinConnect4, or
click the “Cancel” button to undo the change.
6. When you click “OK”, ThinConnect4 will be updated and reboot.
The Setup Utility will start searching again. Please refer to section 3.3.2 Searching
for ThinConnect4 (Page 25 to 27) Step 1 to 4) to proceed.