EXP Computer ThinConnect4 - Manual (Page 120)

<110> ThinConnect4
7.3 Syslog settings
Syslog is a system messages recording utility. This utility will log event and system
information (This is an option setting).
Usually system messages can be sent/received through a network by using the UDP Port
514. Most of UNIX host, which records those messages as the system messages are
received and recorded by Syslog demon process.
Syslog event/information in ThinConnect4
The ThinConnect4 current firmware has the following event/information logging
capability. (Depending on firmware version, some of the functions may not available)
• Record “AT” commands sent to modem/TA on both serial and the response received
from Modem/TA.
• Confirm PPP connected sequence.
• Confirm global IP address provided by ISP.
• Record connecting/disconnecting, confirm connecting, disconnecting time and
communicating time.
• Others.
Syslog settings
1. Click the “Syslog” button in “Settings for LAN Port” window.