EXP Computer ThinConnect4 - Manual (Page 40)

<30> ThinConnect4
Add ThinConnect4 to existing LAN
If you are adding ThinConnect4 to an existing LAN which IP address setting is different
from ThinConnect4 default value (192.168.0.1, Subnet Mask: 255.255.255.0), then the
ThinConnect4 IP should be changed to meet with those existing setting. Please contact the
network manager for proper IP and Subnet Mask setting.
Changing IP address and Subnet Mask
1. In the window on page 27 step 4), click on the “Settings”, and then click “Settings”
button in the LAN Port section.
2. In the window below, enter the IP Address and Subnet Mask you wish to use.
• IP Address: Enter ThinConnect4 new IP address.
• Subnet Mask: The Subnet Mask of the network.