EXP Computer ThinConnect4 - Manual (Page 38)

<28> ThinConnect4
3.3.3 Nickname Setup and Firmware Version
Nickname Setup
1. After finishing the setting from 3.3.1 Start the ThinConnect4 Setup Utility
through 3.3.2 Searching for ThinConnect4 (Page 25 to 27), the window below will
be display..
2. Enter a name you prefer in the “Nickname” field. The maximum string
lengths are 32 characters.
Note: When there are more than one ThinConnect4 on LAN, the nickname will help
user identify each one of them.
In the last window, you can click “Close” button. This will put you back to the
3.3.2 Searching for ThinConnect4 (on page 27 step 4)).
Firmware Version
Below the nickname, there is a field shows the ThinConnect4 firmware version.
You can verify the ThinConnect4 firmware revision here.