EXP Computer ThinConnect4 - Manual (Page 82)

<72> ThinConnect4
5.1 RAS Client Dial-Up IP Connection
ThinConnect4 (set up as a RAS client) connects to a remote RAS server by using PSTN and
ISDN.
5.1.1 Connection Settings
1. Click “Port Usage” tab, then choose “RAS Client Dial-Up IP Connection” ,
and click ”Detail Settings” button.
If you want to use RAS Server on the same port, please choose “RAS client Dial-Up IP
Connection and RAS server IP Connection” and click the “Detail Settings” button.
Note: The function of the Dial-up relation can be set only to one of
the serial ports 1 or 2. For example, if you set the serial port 1 to
“ISP Dial-UP IP Connection”, you cannot set up either “ISP
Dial-UP IP Connection” or “RAS Client Dial-UP IP Connection”
on serial port 2. You can use “RAS Server IP Connection”,
“Networking Dial-Up IP Connection”, or “Leased Line IP
Connection” without the default gateway settings.
Refer to the possible functional combinations of two serial ports
on 3.3.5 Options of serial port (Page 37).