EXP Computer ThinConnect4 - Manual (Page 144)

<134> ThinConnect4
5. If the following screen is displayed, most of the time is because of the equipment is
malfunctioned.
Click the “OK” button to clear the box..
The following could be the a reason to cause the error:
• MODEM/TA’s malfunction
• ThinConnect4 malfunctioned
• Abnormal Cable (LAN and Serial) connect or disconnect.
6. Click the “Close” button to end Setup Utility
Note: Your ISP’s non-activity timer can also disconnect ThinConnect4.
End of 9.3.1 PSTN and ISDN