EXP Computer ThinConnect4 - Manual (Page 24)

<14> ThinConnect4
2.6.2 TCP/IP protocol installation
Windows 95/98 CD-ROM requires
During the TCP/IP protocol installation, you will need Windows 95/98 CD-ROM to
complete the task.
Note: 1. If you are working on a PC that has Windows 95/98 pre-installed and the
TCP/IP installation procedures request the Windows 95/98 CD-ROM, you
may try the folder C:\windows\optons\cabs. This is where a copy of the
Windows 95/98 can be found.
2. In some computers the default path for the CD-ROM drive is incorrect. You
may have to adjust the path as needed. (D:\win95 or E:\win95)
The procedures to install TCP/IP
1. Please refer to the window on previous page of 2.6.1 Verify the TCP/IP protocol
Installation and click on “Add” button.
2. Choose protocol and click “Add” below window.