EXP Computer ThinConnect4 - Manual (Page 80)

<70> ThinConnect4
Setting up “Set Non Disconnect Timer Period”
User can stay connected with ISP by specify the time period based on the PC’s time of day
clock. The setting will overwrite the “Non Activity Timer”.
1. Check on “Set Non Disconnect Timer Period” check box.
2. Enter starting hour (0 to 23) and minutes.
3. Enter ending hour (0 to 23) and minutes.
Caution:
• Make sure the clock on your PC is correct. When clicking the “Settings”
button of the Setup Utility, ThinConnect4 will acquire the current time of your PC
and synchronize the internal clock with the PC clock automatically.
• If for some reason the ThinConnect4 power is off, the “Set Non Disconnect Timer
Period” function will becomes invalid. Restart the Setup Utility again so it will read
the correct time from your PC.
• When you select “Set Non Disconnect Timer Period”, ThinConnect4 will
automatically disconnect when the clock reaches the ending time.
Click the “OK” button to exit this setting.
Go to Chapter 7, Advanced settings of LAN (Page97).
End of 4.3 Connection Timer