How to use this manual – Epson Endeavor 468C User Manual
Page 17
How to Use This Manual
You don’t have to read everything in this book to use your
computer; see the following chapter summaries to find the
sections you need.
Chapter 1
provides steps for setting up your system and
connecting peripheral devices.
Chapter
2 describes how to run the SETUP program to define
your computer’s configuration. Do this the first time you use
your computer. If you change the configuration later, you will
need to run it again.
Chapter
3 covers general operating procedures, such as turning
the computer on and off, using disks and disk drives, entering a
password, and changing the processor speed.
Chapter
4 describes how to install optional equipment such as
option cards and memory modules.
Chapter
5 explains how to install and remove disk drives.
Chapter
6 contains troubleshooting tips.
Appendix A
lists the specifications of your computer.
At the end of this manual, you’ll find a
Glossary
and an Index.
4 Introduction